VANISH is a concentrated, heavy duty bulk tank and pipeline cleaner. Developed to provide maximum hydroxide alkalinity along with dispersing agents, water softeners, wetting agents and Iron inhibiting ingredients. VANISH is an economical alternative to most pipeline cleaners due to its high dilution rates.

VANISH is a member of the Elite Products program. Other products included in the Vanco Elite Product program is VanGuard, Vantage, Vigilant, Vision, VanQuarter, Vigor, Vibrant, Venom, Vigor II Powder, and Vanco's Premium Dairy Wipes.

For more information on the Elite Products cash incentive program please click on the Elite Products tab on the left.

VANISH PIPELINE CLEANING RATIO:
Water Hardness Oz. of VANISH to Water
0 to 14 Grains 1 Oz. to 9 Gallons of Water
15 to 24 Grains 1 Oz. to 6 Gallons of Water
25 to 39 Grains 1 Oz. to 4 Gallons of Water

GENERAL INSTRUCTIONS
Upon completion of milking, thoroughly flush
entire pipeline system with warm water.
(100°F-110°F/38°C-43°C)
Do NOT recycle rinse water.
Once rinse water runs clean and clear, add the
appropriate amount of VANISH liquid CIP
cleaner to the HOT water. Cycle cleaning solution
through the entire system for 8-10 minutes.
Flush entire pipeline thoroughly with warm water.
(100°F-110°F/38°C-43°C)
Do NOT recycle rinse water.
Acid rinse using a VANCO acid.
Sanitize prior to milking according to local
Health Department regulations.
More VANISH may be required for larger systems.

FOR BEST RESULTS
Start wash with water temperature at 165°F/74°C.
If using cooler water, more VANISH liquid CIP
cleaner will be necessary.
Stop wash when the water temperature falls
below 105°F/41°C.