VENOM is a concentrated low foaming circulating and spray acid blend developed for challenging applications in the food processing, dairy, beverage and general industry. VENOM contains a balanced blend of phosphoric and citric acids and oil emulsifying wetting agents developed for removal of soap buildup, neutralization of alkaline rinse, de-scaling and rust removal of surfaces.

VENOM is a member of the Elite Products program. Other products included in the Vanco Elite Product program is VanGuard, Vantage, Vigilant, Vision, VanQuarter, Vigor, Vanish, Vibrant, Vigor II Powder, and Vanco's Premium Dairy Wipes.

For more information on the Elite Products cash incentive program please click on the Elite Products tab on the left.

FOR ACID RINSING PIPELINES AND
BULK TANKS.
Upon completion of milking or emptying
bulk tank, thoroughly flush system with
warm water. (100°F-110°F/38°C-43°C)
Do NOT recycle rinse water.
Once rinse water runs clean and clear,
wash system with a Vanco liquid C.I.P.
cleaner. Follow the instructions found
on the C.I.P. label.
Rinse with warm or cold water using
1 ounce of VENOM to 20 gallons of
water. Additional VENOM may be
required depending on system and water
conditions.
Prior to milking, sanitize system according
to local Health Department regulations.

FOR ACID CLEANING
Upon completion of milking, thoroughly
flush entire pipeline system with warm
water. (100°F-110°F/38°C-43°C)
Do NOT recycle rinse water.
Once rinse water runs clean and clear, wash
system with a Vanco liquid C.I.P cleaner.
Follow the instructions found on the C.I.P.
label. Drain and rinse with water.
Wash system with 1 ounce of VENOM to
10 gallons of HOT (140°F-160°F/60°C-70°C)
water for 8-10 minutes.
For heavy deposits, the previous step may need
to be repeated until desired results are accomplished.
Prior to milking, sanitize system according to local
Health Department regulations.